HOMAG KLO 79/02/E12/S3 Edgebander machine

Woodworking equipment / Edge Banding

HOMAG KLO 79/02/E12/S3 Edgebander machine
Technical dates
Type
automatic
Panel thickness min
7
mm.
Panel thickness max
60
mm.
Edging thickness max
0.4
mm.

Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Edgebanding thickness 0.4 - 12 mm and 10 - 65 mm in height, min. workpiece width 85 mm, panel thickness 7 - 60 mm, 50 mm panel overhang, profile depth top 20 mm and 15 mm for bottom; adjustable infeed fence w/digital readout. -- Line control with HOMATIC "2000" controller features: Real-time "OS9" operating system, functions in Windows environment; w/PC compatible keyboard, 10.4" LCD flat panel display and Ethernet net work connection. Stores working programs and controls functions of workstations, allows fault diagnostic and more; storage of (40) working programs, each with (160) functions for remote control of processing units. -- NC 16 Operator interface with storage of upto 40 working programs, each with upto 160 functions. the system is serial interface to IBM PC (MS DOS) compatable. -- 80 mm Wide feed track w/central chain track lubrication, 5 HP feed drive, variable feed speed 39 - 78 FPM; passline height 950 mm; powered raise-and-lower of upper pressure beam with powered "double wide" compound V-belt type holddown. -- Equipped with: Adjustable infeed fence; Chip conveyor belt. Top & bottom solvent spray application unit (model "2929"); top & bottom inlay scoring unit with (2) 1.2 HP - 12,000 RPM non-tiltable motors, tracing from top & side. -- (2) 4.5 HP - 9,000 RPM Tiltable milling/profiling heads with selectable rotation switches (1st one jump, 2nd one fixed), SIKO digitals for horizontal & vertical adjustments, electronic frequency invertor for control of motor speed & braking (model "UF 12"); air blast nozzle for cleaning panel edges. -- "Quick Melt" Glue system "QE 34" w/pre-melt granular hopper and with reversible DC drive for glue application roller to either substrate or banding material; heated glue roller and automatic sensor to control melting quantity. -- Model "HL 26" strip & coil feed edgebanding magazine for max. 3 mm thick coil banding and strip feed for up to 14 mm thickness, 13° infeed angle for strip feed. -- (1) Large 200 mm dia. drive roll and a 4-position revolver pressure section with (3) sets of softforming pressure rolls (for G-profiles) and (1) set of straight idle pressure rolls; cooling blower at end of pressure zone and air jet for cleaning panel overhang area. - Top "Pizza" knife for inlay profile w/vertical & horizontal tracing. -- Workstations: End trimming unit with (2) 0.6 HP - 12,000 RPM motors, pneumatic selection of chamfer or straight cutting; features manual lateral setting for max. 28 mm softforming depth. -- Top & bottom flush trimming unit with (2) 1.4 HP - 12,000 RPM non-tiltable motors (model "3209"); top & bottom chamfer trimming unit with (2) 0.6 HP - 12,000 RPM motors, tiltable 0° to 30° (model "3216"). -- Top & bottom profile trim units for leading & trailing edge, (4) 0.6 HP - 12,000 RPM motors, up to 4 mm edge thickness, with quick-change device (model "FF 12"). -- All trim station motors are 200 Cy HF and equipped w/electronic frequency inverter for control of motor speed and braking; Quick disconnect electrical plugs for all motors; workstations with SIKO digital readouts. -- Top & bottom profile knife PVC scraping unit for 2 - 6 mm radius (0.078" min. to 0.47" max. radius), pneumatic pressure control for scraping knives and air jet nozzle, PVC shaving collector box (model "4510"); open space for additional workstation. Top & bottom buffing unit w/oscillation control, 0.3 HP - 1,650 RPM motors. -- Complete with: (1) 300 Hz, 10 KVA & (1) 100 Hz, 12 KVA Frequency inverter, adjustable outrigger panel support up to 31-1/2" and with (4) floor supports, sound enclosures w/windows over tenoner section and all trim stations in edgebander section, machine base w/built-in chip belt removal system.

Commercial offer
Calculation of the final cost of the equipment with all the customs, transport and tax costs when purchasing through our service. Details...
Request quotationSample Quotation
Supplier
Manufacturer
Homag Group AG logo
Condition
Good
Year of construction
1997
Location
USA
Added
October 13, 2016
Description

used HOMAG KLO 79/02/E12/S3 Edgebander machine

Price excl. VAT
43 012.17EUR
Price inkl. VAT
49 464EUR
Supplier
Country
USA
City
Charlotte
Phine
800.374.5009
Service centers
Your location
Purchase HOMAG KLO 79/02/E12/S3 Edgebander machine , Price Edge Banding, To sell Used HOMAG KLO 79/02/E12/S3 Edgebander machine , Purchase with credit HOMAG KLO 79/02/E12/S3 Edgebander machine , Leasing to buy Edge Banding, Transport costs Edge Banding, Edge Banding to USA, Equipment delievery from USA, Sale Woodworking equipment , Catalouge Edge Banding, Equipment condition - Used, Supplier Edge Banding from USA, Customs Clearance costs HOMAG KLO 79/02/E12/S3 Edgebander machine, Catalouge of new and used Woodworking equipment with price, Transport companies delivering equipment from USA, Delivery from USA