Wemhoener universal 2000 Membrane Press with Pin system

Woodworking equipment / Presses / Vacuum press

Wemhoener universal 2000 Membrane Press with Pin system
  • Wemhoener universal 2000 Membrane Press with Pin system : mini image 1
  • Wemhoener universal 2000 Membrane Press with Pin system : mini image 2
  • Wemhoener universal 2000 Membrane Press with Pin system : mini image 3
  • Wemhoener universal 2000 Membrane Press with Pin system : mini image 4
Technical dates
Размеры рабочей поверхности
2585 x 1320
мм

Type : Wemhoener VARIOPRESS® Universal 2000 – L -Shuttle
• year of construction is December 1999
• 1 tables with automatic pin system
• 1 Paternoster 10 rolls
• Automatic foil laydown system
• Automatic Cutting unit
Wemhoner universal 2000 Membranpresse year of construction is December 1999 with 1 table automatic pin. For 3D applications with moderate capacity, the use of the VARIOPRESS® Universal 2000 is recommend which provides an excellent flexibility in the production of high gloss surfaces, radius fronts or for 3D veneer applications.
Press Typ : Variopin Universal 2000 L- shuttle system with 1 table.
Year of construction December 1999
Press system Hydr. single daylight down stroke Press body consists of steel frames which are bolted together to form a closed unit. Each frame is manufactured out of a single piece.
Pin System: 1 table Vario Pin system 2585 x1320mm
L-shuttle feeding- and emptying system of the press
Membrane: Yes, with automatic clamping system- pneumatic adjustment of membrane tension at all 4 sites of the press
Heating platen dimensions: 2800 mm x 1500 mm electrical- with oil circulation
Loading- feeding side: 2800 mm
Max. operating area Feeding width: 2585 mm x 1320 mm
Max. size of panel 2540 mm x 1250 mm
Foil type: 1400 - 1450mm - PVC, PET, PP, ABS, veneer, HPL
Press modes: - with Membrane and without Membrane
- Simultaneous press process
Pressure chamber height: 60 mm
Max thickness of panel: max. 35 mm
Daylight opening: ca. 250 mm
Working height 850mm – 900mm
Number of pressing cylinders: 4
Diameter of press pistons: Ø 155 mm and 250 mm lifting way
Number of press tables: 1 with pin system
Max. pressure of press: 2400 kN
Chamber pressure: max. 6 bar
Operating pressure of the hydraulic system: max. 320 bar
Operating voltage: 400 V
Control voltage: 24 V
Frequency: 50/60 Hz
Installed power Supply: 47 kW
Necessary air pressure: 8 bar
Operating temperature: max. 160°C
Membrane Clamping System at all four sides of the press.
Control cabinet: operating panel, Siemens, Type S5 with OP27
Weight of press approximately 18.000 kg
Size of the line: approximately 9,2m x 4m long
Technical description
The opto-electronic measuring system detects the occupancy of the feeding tray. It activates the small, square recording heads (PINs) with the bright/dark principle and so two levels for the subsequent injection caused the slide of management within the Pres area.
After pressing the pins across a magnetic table are neutralized and the feeding tray can be newly allocated. The same batch should be grouted again, keep the pins in the previously set request.
The integrated PLC allows also commission-oriented optimization of part of. An optimization program, E.g. to reduce film consumption, taking into account the decor direction of the film can be done by interfacing to a PC. The system is low-maintenance and installed outside the press area.
Basic design consisting of:
• reading station
• Mech. Setting mechanism
• Display and reset table
• PLC control
• 1 Piece of feeding tray, compl. Fittedwith pins
Rapha Systems Handels-GmbH
Griesperwarth 3-4
3262 Wang, Austria


Commercial offer
Calculation of the final cost of the equipment with all the customs, transport and tax costs when purchasing through our service. Details...
Request quotationSample Quotation
Wemhöner Surface Technologies 
GmbH & Co. KG logo
Condition
Good
Year of construction
1999
Location
Austria
Added
October 31, 2016
Description

used Wemhoener universal 2000 Membrane Press with Pin system

Supplier
Country
Austria
City
Wang
Address
Австрия, Wang, Griesperwarth 3-4
Griesperwarth 3-4
Phine
+43 (0)7488/71133
Service centers
Your location
Purchase Wemhoener universal 2000 Membrane Press with Pin system , Price Presses, To sell Used Wemhoener universal 2000 Membrane Press with Pin system , Purchase with credit Wemhoener universal 2000 Membrane Press with Pin system , Leasing to buy Presses, Transport costs Presses, Presses to Austria, Equipment delievery from Austria, Sale Woodworking equipment , Catalouge Presses, Equipment condition - Used, Supplier Presses from Austria, Customs Clearance costs Wemhoener universal 2000 Membrane Press with Pin system, Catalouge of new and used Woodworking equipment with price, Transport companies delivering equipment from Austria, Delivery from Austria